Safety Information
The signs below might be in the user manual, labeling or other component.
They are the requirement of standard and using.
Measurement Principle
This product uses the Oscillometric Measuring method to detect blood pressure.
Before every measurement, the unit establishes a “zero pressure” equivalent to the air
pressure. Then it starts inflating the arm cuff, meanwhile, the unit detects pressure
oscillations generated by beat-to-beat pulsatile, which is used to determine the systolic
and diastolic pressure, and also pulse rate.
The device also compares the longest and the shortest time intervals of detected
pulse waves to mean time interval then calculates standard deviation. The device will
display a warning signal with the reading to indicate the detection of irregular heartbeat
when the difference of the time intervals is over 25%.
Features:
Maximum 60 records per each user
General Description
3rd technonoly: Measuring during inflation
73mm×49 mm Blue LCD display with white backlight
Indications for Use
Thank you for selecting TRANSTEK arm type blood pressure monitor (TMB-995-
BT). The monitor features blood pressure measurement, pulse rate measurement and
the result storage. The design provides you with two years of reliable service.
Readings taken by the TMB-995-BT are equivalent to those obtained by a trained
observer using the cuff and stethoscope auscultation method.
This manual contains important safety and care information, and provides
step by step instructions for using the product.
Read the manual thoroughly before using the product.
The Transtek Blood Pressure Monitor is digital monitors intended for use in measuring
blood pressure and heartbeat rate with arm circumference ranging from 22cm to 42cm
(about 8¾˝-16½˝).
It is intended for adult indoor use only.
Contraindications
This device is contraindicated for any person who is connected to a wearable or
implantable electronic device or instrument, such as a pacemaker or defibrillator.
This blood pressure monitor is not intended to be a diagnostic device.
Contact your physician if hypertensive values are indicated.
Symbol for “THE OPERATION
GUIDE MUST BE READ”
Symbol for “MANUFACTURER”
Symbol for “SERIAL NUMBER”
Symbol for “TYPE BF APPLIED
PARTS”
Symbol for “DIRECT CURRENT”
Symbol for “ENVIRONMENT
PROTECTION - Electrical waste
products should not be disposed of
with household waste. Please recycle
where facilities exist. Check with your
local authority or retailer for recycling
advice”
Symbol for “MANUFACTURE
DATE”
For indoor use only
F1
T1A/250V Φ3.6*10CCC
Symbol for “Class II Equipment”
Caution: These notes must be
observed to prevent any damage
to the device.
SN
The Bluetooth Combination Mark
Symbol for “Including RF
transmitter”
2
3
INTRODUCTION
INTRODUCTION
The Green Dot is the license
symbol of a European network of
industry-funded systems for
recycling the packaging materials
of consumer goods.
Symbol for “Recycle”
