Safety Information
The signs below might be in the user manual, labeling or other component.
They are the requirement of standard and using.
Measurement Principle
This product uses the Oscillometric Measuring method to detect blood pressure.
Before every measurement, the unit establishes a “zero pressure” equivalent to the
atmospheric pressure. Then it starts inflating the arm cuff, meanwhile, the unit detects
pressure oscillations generated by beat-to-beat pulsatile, which is used to determine
the systolic and diastolic pressure, and also pulse rate.
General Description
Indications for Use
The Transtek Blood Pressure Monitor is a digital monitor intended for use in
measuring blood pressure and heartbeat rate with arm circumference ranging
from 22 cm to 32 cm ( about 8¾˝-12½˝ ) or 22cm to 42cm(about 8¾˝-16½˝).
It is intended for adult indoor use only.
Thank you for selecting TRANSTEK arm type blood pressure monitor
(TMB-1585-BS). The monitor features blood pressure measurement, pulse
rate measurement and the result storage. The design provides you with
two years of reliable service.
Readings taken by the TMB-1585-BS are equivalent to those obtained by
a trained observer using the cuff and stethoscope auscultation method.
This manual contains important safety and care information, and
provides step by step instructions for using the product.
Read the manual thoroughly before using the product.
Features:
Maximum 60 records per each user
3rd technonoly: Measuring during inflation
100mm×68 mm Digital LCD display
1.The device is not suitable for use on may be pregnant women or pregnant women.
2.The device is not suitable for use on patients with implanted,electrocical devices,
such as cardiac pacemakers, defibrillators.
Contraindications
2
3
INTRODUCTION
INTRODUCTION
Refer to instruction manual/booklet
To signify that the instruction manual/booklet must be read.
Symbol for “Manufacturer”
Symbol for “Serial Number”
Symbol for “Type BF applied part”
Symbol for “Direct Current”
The symbol indicates that the product should not be discarded
as unsorted waste but must be sent to separate collection
facilities for recovery and recycling.
Symbol for “Date and Country of manufacture”
For indoor use only
Symbol for “Class II Equipment”
SN
Symbol for “Recycle”
Caution
Indicates that caution is necessary when operating the device
or control close to where the symbol is placed, or that the
current situation needs operator awareness or operator action
in order to avoid undesirable consequences
.
