If you did not get the correct measurement, you can delete all
results by following steps below.(Take User 1 for example)
Delete the Records
About the Clock mode
If you set the clock mode on in the
setting mode, when you turn off the
blood pressure monitor, the backlight
of the LCD will turn off, the LCD will
display the current time.
When the backlight of the LCD is off,
press any buttons to light it up, the
following display will show.
Hold pressing the Lock button
until the LCD displays “OFF”,
this indicates the touch keys
(such as MEM, START/STOP,
SET) have been locked.
Hold pressing the Lock button
until the LCD displays “ON” to
unlock the keys.
About the Lock Button
The unnecessary keys’ touch will make the blood pressure monitor
turn on and waste electricity. To avoid this, you can press the Lock
button to lock the keys if necessary.
1.Hold pressing “MEM” button
for 3 seconds when the
monitor is in the memory
recall mode ,the flash
display “ User ID+ dEL ALL”
will show.
2.Press “SET” button to
confirm deleting and
the monitor will display
“dEL dOnE” and
then turn off.
3. If there is no record.
the following display will
show.
Note: To exit out of delete mode
without deleting any records,
press START/STOP button
before pressing "SET" to confirm
any delete commands.
DATA MANAGEMENT
SPECIAL FUNCTION
19
18