Why does my blood pressure fluctuate
throughout the day?
Is the result the same
if measuring on the
right arm?
Why do I get different
blood pressure at home
compared to the hospital?
1. Individual blood pressure varies
multiple times everyday. It is also
affected by the way you tie your cuff and
your measurement position, so please
take the measurement under the same
conditions.
2. If the person takes medicine, the
pressure will vary more.
3. Wait at least 3 minutes for another
measurement.
The blood pressure is different even
throughout the day due to weather,
emotion, exercise etc. Also, there is
the “white coat” effect, which means
blood pressure usually increases in
clinical settings.
It is ok for both arms, but there will
be some different results for
different people. We suggest you
measure the same arm every time.
What you need to pay attention to
when you measure your blood
pressure at home:
If the cuff is tied properly.
If the cuff is too tight or too loose.
If the cuff is tied on the upper arm.
If you feel anxious.
Taking 2-3 deep breaths before
beginning will be better for
measuring.
Advice: Relax yourself for 4-5
minutes until you calm down.
18
19
ABOUT BLOOD PRESSURE
TROUBLE SHOOTING
PROBLEM
SYMPTOM
CHECK THIS
REMEDY
No power
Low Battery
Error
message
Display can
not light up.
Batteries are exhausted.
Replace with new batteries.
Install the batteries or plug in the
adapter properly.
Replace with new batteries.
Batteries are installed
incorrectly or Adapter is
not plugged in properly.
Lo shows The battery is too low.
E 1 shows
E 3 shows
E 4 shows
The measurement
failed.
The cuff is not wrapped
or wrapped incorrectly,
or the cuff air plug is
loose.
Refasten the cuff and insert
air tube plug correctly then
measure again.
Relax for 5 minutes
,
and then
keep still, measure again.
Relax for 5 minutes and
measure again.
Pulse is not detected
during measuring.
Loosen the clothing on the
arm and then measure again.
Warning
message
Relax for a moment. Refasten
the cuff and then measure again.
If the problem persists, contact
your physician.
out shows
Out of measurement
range
EExx shows
Hardware error
(xx can be some digital
symbol, such as 1, 2,
etc.)
Turn off monitor and measure
again. If EEx still appears on
the display, please contact the
retailer or our customer service.
E 5 shows
Failed to communicate
with the server
Try a place with better signal,
or contact customer service
E 6 shows
Radio communication
failure
Contact customer service
Excessive body motion
(such as shaking of the
arm with the cuff on)
or Pulse is weak
during a measuring.
E 2 or
shows
If any abnormality arises during use, please check the following points:
NOTE:
If the product still does not work, contact the Customer Service. Under no
circumstance should you disassemble or attempt to repair the unit by yourself.
The supply voltage is
too high.
Replace with the authorized
adapter.
H bAt shows
High Battery
