Transtector I2R SPV1000 3-40 Скачать руководство пользователя страница 2

Страница: 2 / 4

Installation Guide

– AC Surge Protection

1104-11-101-M Rev D

transtector.com

DANGER

Electrical Shock or Burn



Install only in a restricted access enclosure or control cabinet that requires a key or tool to open.



This SPD should only be installed and serviced by qualified electrical personnel.



All National and Local Electric Codes must be observed.



Confirm that the SPD is rated for the voltage of the application.



Before installation, turn off all power to equipment to prevent accidental electrical shock or

injury.



Replace all covers and doors before restoring power to this equipment.

Structure and Dimensions

Figure 1. I

R SPV 1000 3-40

Attaching the SPD to the DIN Rail

Position the SPD on the top edge of the 35mm DIN rail, then press down until a ‘click’ is heard.

Figure 2. Locating on DIN Rail

Figure 3. Ready for Wiring

Содержание I2R SPV1000 3-40

Страница 1: ...on Level Up 5 kV Response Time 25 ns Recommended Over Current Protection Device 32A circuit breaker with C tripping characteristic per IEC 60364 4 43 Status Indication Visual indication LED Black norm...

Страница 2: ...cal Electric Codes must be observed Confirm that the SPD is rated for the voltage of the application Before installation turn off all power to equipment to prevent accidental electrical shock or injur...

Страница 3: ...reater than 6 mm2 10 AWG diameter If Kelvin connections are used the load capacity of the conductor must be sized according to the load System Configurations Determine the electrical voltage configura...

Страница 4: ...aintenance The SPD should be scheduled for periodic inspection to ensure the SPD is operations the module is secure in the base and all wire connections are tight If SPD is damaged contact Transtector...