1-800-724-6306 • www.transtechsys.com
1.
Turn the SDG 200 unit OFF.
2.
Connect the charger to the charger connector located on the back of
the SDG 200.
3.
Plug the charger into a standard AC outlet.
4.
The red indicator lamp will turn green to indicate that the batteries are
charged. (approx. 4hrs)
5.
Unplug the charger from the power source before disconnecting the
charger from the SDG 200.
Battery Care Tips
• Whenever uncertain about the battery charge level or condition,
recharge it
• The battery will self-discharge and should NOT be left uncharged for
more than 30 days
• An occasional complete discharge followed by a full recharge is
recommended
•
NEVER
drop the battery as this can damage the internals
•
DO NOT
store in freezer or expose to extreme heat
• Battery should be fully charged before use
Charging Batteries
4
