Transtech PQI 301, Руководство оператора

Страница: 8 / 36

3.2 Starting and Self Test
Important
Before using the unit for the first time the internal battery must be fully charged.
Follow the setup instructions in Section 2.2 above.
3.2.1 Starting the PQI unit for the first time.
A. Turn the PQI on by flipping the POWER switch. After a few seconds the
display will show the TransTech boot up screen. After the boot up screen
clears the PQI will display the SELECT PAVEMENT TYPE screen. From the
main menu option #2 also allows changing of this setting. The selection of a
“Pavement Type” / stone size in the mix which the PQI is going to be used on
is required as part of the initial calibration of the unit.
Select Pavement Type
1) 25-35 mm (Base )
2) 16-24 mm (Inter.)
3) 9-15 mm (Top)
B. The PQI will prompt the user for the correct unit of measurement either
inches or mm. The PQI 301 asks the user to input the depth of the pavement
being laid out by the paver.
Lift Thickness
Enter Units
1) inches
2) mm
Lift Thickness
Enter Thickness ( in or mm)
“Press Enter after entering depth”
Startup Menu
1) Setup Menu
2) Run
C. Press the number 1 to show the first page of the MAIN MENU (also called
setup menu). Press 2 to return to an operating mode if setup was performed
earlier in the day.
7 www.transtechsys.com - 1-800-724-6306