TransTank FireBoss, Руководство оператора

Страница: 11 / 20

1800 816 277 www.tti.com.au
11
FireBoss
™
Product HandBook
FireBoss Operation
Initial Operation Set Up
The FireBoss Low Profile UTV Fire Fighting Unit is operated as follows:
• Fill the tank from an appropriate water source, refer to the Filling the Tank procedure above.
• Unlock the hose reel then pull out the required length of hose off the reel. Check that the hose nozzle
is closed.
Note: The pump is self-priming due to the direct coupling to the FireBoss tank.
• Start the pump (referring to the procedure above) and adjust engine speed.
CAUTION: To prevent damage, do not operate the pump for more than five minutes
with the hose nozzle closed.
• Open the fire hose’s nozzle by rotating it to achieve the desired spray pattern. If necessary, adjust the
engine speed to obtain the optimal water pressure.
• Upon completion of the task, close the fire hose nozzle and turn the pump engine to OFF.
• Open the fire hose nozzle again to release the residual pressure.
• Rewind the hose onto the reel by manually winding the handle on the side of the reel. Close the nozzle
once the hose is fully retracted and the nozzle is located near the hose’s fairlead.