Product HandBook
AquaTrans
™
& AquaMove
™
1800 816 277
www.tti.com.au
8
⦁
Figure 2 – AquaTrans & AquaMove Mounting System
Filling the Tank
CAUTION: The AquaTrans & AquaMove unit is designed for water and other benign
fluid use only. It must not be used for harsh chemicals or fuel.
The AquaTrans & AquaMove tank is filled by gravity from a supply, such as an overhead standpipe or
supply hose as follows:
•
Remove the filling lid from the tank’s top opening.
•
Position the AquaTrans & AquaMove unit’s top-mounted fill point under the standpipe or life up and
suitable secure a supply hose.
•
Open the standpipe or supply hose valve and allow water to flow into the tank.
CAUTION: To prevent overflow, do not leave the filling operation unattended.
•
An optional sight level tube is fitted to the tank, providing a visual indicator of the level of water in the
tank. If a sight level tube is not fitted, observe the water level directly in the tank. When the tank is
filled, close the supply’s valve.
•
Upon completion of filling, replace the tank’s filling lid.
