![TransTank AquaMove Скачать руководство пользователя страница 5](http://html1.mh-extra.com/html/transtank/aquamove/aquamove_operators-handbook-manual_1152625005.webp)
Product HandBook
AquaTrans
™
& AquaMove
™
1800 816 277
www.tti.com.au
5
10. Appropriate working at heights OH&S requirements must be followed if accessing the top of the tank
is required.
11. TTi recommends the LiquidLocker baffle system be used in AquaTrans & AquaMove tanks of 2,000
litres and above. It is essential the LiquidLocker system be used in tanks of 10,000 litres and above.
12. All hoses and pipes attached to the AquaTrans & AquaMove tanks must be flexible, to prevent damage
due to vibration from pumps and motors. Rigid pipes must not be coupled directly to the tank.
13. For AquaTrans & AquaMove tanks fitted with 3” outlets, additional venting is required to prevent
internal negative pressure. This can be achieved by loosening or opening the tank lid.
14. The AquaTrans & AquaMove must never be left unattended while being filled.
15. Care should be taken at all times, particularly when operating on rough or steep terrain. Drivers
should be aware of fluid surge affecting the centre of gravity.
16. The AquaTrans & AquaMove has safety labels affixed to various locations on the unit. These labels
should be kept clean and legible, and replaced if damaged.
17. Any unauthorised modifications to this equipment may affect its function and create a serious safety
risk. Any unauthorised modifications will void any warranty on the unit.
18. Failure to observe the above safety precautions could void your warranty
General Information
Specifications
Tank
Heavy duty UV stabilised chemical resistant polyethylene tank (10 to 17,000
litre capacity),
Standard Equipment
Tank lid and seal (10 to 400 litre tanks)
Tank lid, rim and seal assembly (500 to 17,000 litre tanks) (x2 for 13,000 to
17,000 litre tanks)
¾” Poly drain bung and seal (10 to 400 litre tanks)
1½” MBSP fitting – poly (fitted) (500 to 1,500 litre tanks)
2” MBSP fitting – poly (fitted) (2,000 to 6,000 litre tanks)
3” MBSP fitting – brass (7,000 to 17,000 litre tanks)
Galvanised mounting pins (500 to 7,000 litre tanks)
Galvanised mounting pins and wedges (8,000 litres and above)
Options
Translucent and opaque tank colour range
LiquidLocker™ Baffle Safety System (600 litres and above)
Top mount steel pump plate (220 and 400 litre tanks)
Galvanised steel skid frame (220 and 400 litre tanks)
Galvanised steel mounting frame (2,000 to 17,000 litre tanks)
Water level sight tube (from 200 litres and above)