1800 816 277
www.tti.com.au
12
Product HandBook
AquaDelivery
™
•
Attach one end of a supplied 3” layflat hydrant hose to the AquaDelivery’s hydrant port, the other end to
the hydrant.
•
Open the supply hydrant’s valve slowly; water will flow under pressure through the AquaDelivery’s pipe
system into the top of the tank, automatically tipping the tilt-lid.
CAUTION: To prevent overflow, do not leave the filling operation
unattended.
•
A level sight tube is fitted to the rear of the tank, providing a visual indicator of the level of water in the
tank. When the tank is filled, close the supply hydrant’s valve. The tilt-lid will fall flat to close off the
tank’s opening to prevent debris entering.
•
Disconnect the hydrant supply hose. Clean and dry the hose before stowing it in the aluminium storage
box mounted adjacent to the pump unit.
Figure 3 – Hydrant Filling Operation
AquaDelivery Operation
The AquaDelivery Bulk Water Delivery Unit is operated as follows:
•
Install the unit onto the vehicle and check security of all connections (refer to Before First Use procedure
above).
•
Fill the tank from an appropriate water source, refer to the Filling the Tank procedure above.
•
Remove the camlock cap from the pump’s discharge port.
•
Connect one end of the supplied layflat hose to the discharge port, then connect the other end to the
water receiving storage vessel.
