Transporter PLUS 11 MK 2, Руководство пользователя

Страница: 12 / 40

Issue : - Man/P11,02 12 Last rev: 26.08.2010
5. Release the trailer parking brake.
UNLOADING IN THE EVENT OF A MECHANICAL FAILURE
You will require adequate air pressure to enable the locking pawl air valves to
operate.
Should power be lost to the PTO pump, follow the procedure listed below.
1.
Switch the change over control valve (located behind the main rigid control
handles) from the PTO pump to the hand pump position, turning the lever 90
degrees. (See photos above).
2. Place the supplied handle into the hand pump valve. This valve is situated
next to the main rigid control levers.
3. The control handle for the deck you want to move will have to be pulled
towards you and held open, whilst at the same time the hand pump is
manually pumped up and down, lifting the deck so that the locking pawls can
be released.
4. When the locking pawl has been released, de-press the air button whilst
lowering the deck with the control handle. (This operation may be slower than
usual).