Transpak MINI-VERTI TP-202MV, Руководство по эксплуатации, безопасности и запасным частям

Страница: 24 / 72

- 22 -
6. Adjustment
(1) Strap Width
Adjustment for strap in different width can be done with screw driver and wrench.
The adjustment must be made in Three places, Fig.A. Fig.B. Fig.C. as shown below.
For A, the width of band guide should be at 12.5mm when using 9mm and 12mm, strap and
the width of band guide should be at 15.5mm when using 15mm strap.
For B, when you install the RH Bandway ass'y, you need to adjust the position of two nuts
in Fig. B to set the RH Bandway ass'y on the good position. (Center of down layer Strap)
and adjust the height of RH Bandway ass'y about 1.5mm lower then slide table. (Fig .C)
When you change the strap width you need to
change the parts as show in follow detail
：