Transpak MINI-VERTI TP-202MV, Руководство по эксплуатации, безопасности и запасным частям

Страница: 23 / 72

- 21 -
(2) How to Operate
a. TP-202MV
1. Turn main switch QS1 to ON. The heating element will reach the working
temperature at approximately 2 minute.
2. Push the machine to let the sword unit pass through to the pallet. Have the front plate
of the machine close to the package.
3. Pull up the strap end around the package and insert the tip of the strap into the strap
inlet to activate the strapping cycle. Then, the strapping cycle is completed.
4. Move the machine away from the package. Be sure the whole sword unit is totally
out of the package.
b. TP-202MVB
1. Press the Power Switch of UPS
○
a
.
2. When operate the machine with only battery power, press the Reset button
○
d
on the
UPS for around 3 seconds until the battery starts to supply the power
（
LED turns red
）
.
3. Turn main switch QS1 to ON. The heating element will reach the working
temperature in approximately 2 minutes.
4. Push the machine to let the sword unit pass through to the pallet. Have the front
plate of the machine close to the package.
5. Pull up the strap end around the package and insert the tip of the strap into the strap
inlet to activate the strapping cycle. Then , the strapping cycle is completed.
6. Move the machine away from the package. Be sure the whole sword unit is totally
out of the package.
7. After operation, please turn off switch QS1 before turning off UPS.
QS1