8
EN
EN
Introduction
-
This is a professional condenser microphone. It gives you incredi-
ble stage performance. The microphone stand and a zinc alloy ta-
ble-mount clamp make it perfect for condenser microphones and
other mobile microphones. The microphone arm is fully adjustable
and easy to install on any table.
Receiving Shipment
-
When you receive the shipment, check that the contents of the pack-
age correspond to the packing slip. Inform your supplier if any parts
are missing. If the equipment appears damaged, complain to the
carrier immediately and give the supplier a detailed description of the
damage. Keep the damaged packaging to substantiate your complaint.
Contents of Package
-
TRANSNECT Condensator Studio Microphone - Model BC108
- Attached
accessories
1 x condenser microphone
1 x suspension stand
1 x pop
fi
lter
1 x audio cable
1 x shock absorber
1 x table clamp
1 x anti-wind foam cap
1 x user manual
1 x 3.5 mm splitter
1 x manual
Warnings and safety instructions
-
Make sure that the packaging material does not fall into the hands of
children. They may su
ff
ocate!
Read the instructions carefully before use and keep them in a safe
place!
-
Please note the risks and consequences associated with incorrect use
and installation of the product. This may result in personal injury and
damage to the device or products connected to it.
-
Use the product only for the purposes speci
fi
ed in this manual.
-
If the product or its accessories malfunction, are dropped or damaged,
DO NOT use them and consult Customer Service.
-
The product is designed and intended for private use. Do not use it for
commercial purposes.
-
DO NOT pull on the cord to unplug the appliance. DO NOT move the
appliance by pulling or twisting the cord. DO NOT trip over the cable or
make sure that the cable is NOT kinked, twisted or trapped.
-
The product should not be assembled by children or by people with
physical or mental disabilities. The device may only be used if a super-
visor is present who is responsible for the user’s safety.
-
Use and store the product out of the reach of children.
-
DO NOT disassemble, repair or restore the product and its parts. This
may cause damage to the unit and accessories. For your own safety,
these parts should only be replaced by authorised service personnel.
Always send the product to a service centre for repair in order to avoid
damage and personal injury.
-
Before connecting the product, make sure that the mains voltage indi-
cated on the type plate matches that of your mains.
-
DO NOT use or install the product near a bathtub, shower, swimming
pool, or near a sink or basin
fi
lled with water. DO NOT allow the prod-
uct and accessories to come into contact with water. DO NOT immerse
them in water.
-
If water gets into or on the product or accessories, switch o
ff
the de-
vice immediately and contact our customer service. DO NOT touch the
TRANSNECT
