Optional Bracket
Regular Installation
(outswing door)
L-bracket for
narrow frames (optional)
U-bracket for frameless
glass doors (optional)
LZ-bracket for
inswing doors (optional)
Brackets installation are according to door swing direction and door frame type , e.g. narrow frame door , frameless glass door , inswing door , etc.
Regular Installation
1
6
2
3
5
Template
Drill the holes according to the
marks.
8
Connect the power and test the unit.
Insert the anti-tamper caps into the
holes of mounting screws.
Holding Force
Power
9.4mm holes for M6 Blind Nuts.
7mm holes for M5 Blind Nuts.
7
Use the screws to permanently
mount the mounting plate, then
mount the magnet with the fixing
screws provided.
Fixing screw
Place the tamplate to the proper
position of the door and frame .Mark
the hole positions of the template to
the door and frame
Butt Splice(IDC) Connector
Using crimper or pliers and pressing the header of connector
down to even position.
Outswing
Fold the mounting template 90
°
4
Please install the armature plate as
illustrated here. (Dimensions of the
holes are depending on the door
types as illustrated below.)
Armature Plate
Recommendation:
(300 LBS), maximum thickness of door is 44 mm.
(600 LBS), maximum thickness of door is 50 mm.
(800 LBS), maximum thickness of door is 48 mm.
(1200 LBS), maximum thickness of door is 46 mm.
Drill a Ø8mm hole thrugh
d o o r o n c l o s i n g s i d e
enlarge to Ø 12.7mm, by a
sexnut blot on the opening
side. The depth is 36mm.
12.7mm
8mm
Hollow Metal Door
6.8mm for M8-1.25 thread
Reinforced Door
12.7mm 8mm
Solid Door
36mm
Outdoor
Outdoor
Outdoor
Drill a
and tap on closing side
a M8x12.5 thread.
Ø6.8mm hole
Drill a
d o o r, o n c l o s i n g s i d e
enlarge to Ø12.7mm by a
sexnut blot on the opening
side.
Ø8mm hole through
Fasten the mounting plate with the
mounting screws. The position of the
mounting plate should be adjustable.