Transmitter Solutions iGAZER32P-10K/NC, Инструкция пользователя

Страница: 5 / 8

Mounting the Sensor
1. Unscrew the 4 screws and remove the cover.
2. Loosen the captive screw to free the sensor from the mounting plate.
3. Using the included screws, mount the mounting plate to the wall.
4. Use the breakout and cable gland at the bottom of the sensor to run the
wires.
5. Remove the terminal block using longnose pliers and wire the unit
according to the wiring diagram above.
6. Hang the sensor back on to the plate, and use the captive screw to
secure it in place.
7. Re-attach the cover, and use the included small screws to secure it.
8. Attach the hood to the top of the sensor.
1 2 3 4 5
6 7
12
-30
V D
C/A
C 6
0 H
z
NC
NC
NO CO
M
TP
1
TP
2
No
n p
ola
rity
3