background image

DIGITALS INPUTS

The GSM has the ability to send a SMS text message to alert if it is being used. Each 

input can be configured independently with the following parameters. Inside the 

GSM, IN1 and IN2 will be the associated relays for the alarm:

• Contact type: Set if the contact is normally open or normally closed

• On time: Time the input has to be activated to produce trigger the alarm

• Off time: Time the input has to be deactivated to stop producing the alarm

• Restore Time: Time since an alarm has stopped until a new alarm can be produced

Alarms produce SMS texts for all registered users. The SMS text message can be 

customized for each relay. The alarms will be logged into the GSM’s history and can 

be reported through GSMTool.

USER MANAGEMENT

The first user added to the GSM is the device master, which can be changed by a 

SMS text or through GSMTool. The system supports any number of administrator 

users.  Users can be added via a call while pressing the PROG button, via SMS, or via 

GSMTool.

Each user will be added with the following information:

• Phone number: the system supports up to 15 digits with international prefix (ITU-T 

E.164 recommended)

• Access relay: Relay that will be used in two channel and automatic cycle modes.

• Timetable: Hour interval in which the system will grant access to the user. It can be 

unlimited

• Use limit: Number of accesses the system will grant to the user. It can be unlimited

• Administrator: Establishes whether the user is an administrator or a normal user

• Enabled: Establishes whether the user is enabled in the device or not

• Inputs: Alarm input subscription for the user 

Administrator users can use most of the configuration SMS and can, therefore, 

manage the device. 

ACCESS EVENTS
The GSM has can memorize up to 8000 events. Those events can only be read using 

the GSMTool application via USB. For the event system to work, the device needs to 

be configured with the correct date and time and have a button battery installed to 

keep the clock going when the main power is unavailable. The battery must be 

installed with the device powered on.

SMS GUIDE
Configuring your GSM through SMS texting is available to only the administrators 

and the master user.  SMS TEXTING IS CASE SENSITIVE. All parameters separated 

by commas can be omitted to select its default values. Leaving no information 

between commas also will select its default values. 

Ex:

#0000#NEWU+3495789056#B,2@ -> not written parameters will take their default 

values

#0000#NEWU+3495789056#B,2,,,0,23@ -> UM and Uses will take their default values

!

!

79"1:,!*+,-!

/9&1,!1*%6,-!

./"++0&-#.-,/3.&3#1*%6,-.1,01*%6,-5!

"#$%&! [(*/T%)!$(%!8(#/%!/5+Q%1!#3!*/!%72)$2/T!5)%1R!-*)$%1!5)%1!.*//#$!Q%!

1%89*.%0!5)2/T!$(2)!.#++*/0R!!

67*+89%&! :;;;;:M6JX:ABCDA@;BE:ASC?@@BBCI!

! !

%,%&-)!

(&-%"4!

./"++0&-#.(&-%"4.'#%,%5!

"#$%&! '(2)!.#++*/0!2)!3#1!$(%!+*)$%1!5)%1!#/94!

67*+89%&! :;;;;:]LM-K':XI!

JK,,<LMN&! @O.(*1*.$%1!*0+2/2)$1*$2#/!8*))P#10!

UN-6-&! =!$#!3#1+*$!$(%!5)%1!+%+#14!

!! X!$#!3#1+*$!$(%!%^%/$!+%+#14!
!! F!$#!3#1+*$!Q#$(!+%+#12%)!

! !

%"+4,-!

-,/3"7,%,14!

./"++0&-#.1,0%.&3#1*%6,-.1,01*%6,-5!

"#$%&! '(2)!.#++*/0!2)!3#1!$(%!+*)$%1!5)%1!#/94!

67*+89%&! :;;;;:"6<-:ABCDA@;BE:ASC@?@BBCI!

! !

%&#,!

7&1(':*-"4'&1!

./"++0&-#.%&#,.%24;24<24=5!

67*+89%&! :;;;;:-LN6:[OK='G?G?;GHI!

JK,,<LMN&! @O.(*1*.$%1!*0+2/2)$1*$2#/!8*))P#10!

-&! HO["X!3#1!$P#!.(*//%9!+#0%!VN%3*59$W!

!! [OK='!3#1!*5$#+*$2.!.4.9%!+#0%!
!! LJO[X!3#1!#8%/_.9#)%!+#0%!

'S&! '2+%!2/!)%.#/0)!3#1!$(%!#8%/2/T!859)%!2/!$(%!\H!1%9*4!3#1!$P#!.(*//%9!

+#0%!V`W!#1!3#1!$(%!.#11%)8#/02/T!1%9*4!2/!$(%!#$(%1!+#0%)!V`WR!F%$P%%/!S!
*/0!HBB!)%.#/0)!

'H&! '2+%!2/!)%.#/0)!3#1!$(%!#8%/2/T!859)%!2/!$(%!\S!1%9*4!3#1!$P#!.(*//%9!

+#0%!VaW!#1!0%9*4!Q%$P%%/!#8%/2/T!*/0!.9#)2/T!3#1!$(%!1%)$!#3!$(%!+#0%)!
VbWR!F%$P%%/!;!*/0!HBB!)%.#/0)!23!b!*/0!Q%$P%%/!S!*/0!HBB!)%.#/0)!23!a!

'?&! '2+%!2/!)%.#/0)!3#1!$(%!.9#)2/T!859)%!3#1!*5$#+*$2.!.4.9%!*/0!#8%/_.9#)%!

+#0%)!VaWR!'(2)!8*1*+%$%1!+5)$!/#$!Q%!5)%0!3#1!$P#!.(*//%9!+#0%R!
F%$P%%/!S!*/0!HBB!)%.#/0)R!N%3*59$!$2+%)!*1%&!H!)%.#/0)!3#1!`!*/0!aY!S;!
)%.#/0)!3#1!bR!

! !

Содержание GSM RECEIVER





















Отзывы: