Translux Fair-Play BB-1855B-4, Рекомендации по установке, Страница: 9 / 29

I
NDOOR
S
COREBOARD
– F
OUR
S
IDED
A
SSEMBLY
98-0001-23 • 1805.03
5
I
NDOOR
S
COREBOARD
I
NSTALLATION
R
ECOMMENDATIONS
INDOOR SCOREBOARD
FOUR SIDED SCOREBOARD ASSEMBLY
Four Sided Scoreboards require assembly on ground level before it can be hoisted to its final
location. See Figure 5 below.
1. Arrange the scoreboards as shown .
Secure scoreboards to corner angles using hardware supplied.
2. Reconnect the power harnesses – side 1 to 4, side 1 to 2, and side 2 to 3.
Route the power harness coiled inside the scoreboard through the topmost grommet hole
located on each side of the scoreboard. See Figure 5 below.
3. Reconnect the data harness – there are two methods used in connecting the data harness
to the lamp drivers:
•
Standard Data Chain – most common method. See information on page 6 then
continue with step 4 below.
•
Data Splitter Option – see information on page 7 then continue with step 4 below.
4. Attach the corner panels using supplied hardware.
5. Test connections before lifting entire assembly into position .
Test that all harness connections are working by connecting the data cable from the control
and supplying temporary power to
SCOREBOARD SIDE 1
. Refer to Power & Data on page 12.
6. Proceed to Mounting the Scoreboard on page 8.
F
IGURE
5 – A
SSEMBLY OF
F
OUR
S
IDED
S
COREBOARD