Translux Fair-Play BB-1855B-4, Рекомендации по установке, Страница: 11 / 29

I
NDOOR
S
COREBOARD
– F
OUR
S
IDED
A
SSEMBLY
98-0001-23 • 1805.03
7
I
NDOOR
S
COREBOARD
I
NSTALLATION
R
ECOMMENDATIONS
D
ATA
S
PLITTER
O
PTION
A splitter is used on a four sided scoreboard when additional lamp drivers required; stat panels for
example. Data is distributed from the
DATA SPLITTER
to each scoreboard.
1. Open the internal compartment – use any of the following methods:
•
HOME SCORE PANEL
– loosen the retaining screws
,
then move or flip the panel out of
the way.
•
REAR ACCESS COVER
– located on the back of each scoreboard, loosen the retaining
screws, then move the cover out of the way.
CAUTION: DO NOT unplug existing wire connections.
2. Route and connect the data harness.
a. Uncoil the data harness – located in the upper left corner of
SCOREBOARDS SIDE 2, 3
and
4
.
b. Route the data harness – through the grommet holes along the sides of the
scoreboards and to the
DATA SPLITTER
in
SCOREBOARD
SIDE 1
.
c. Connect data harness – from
SIDES 2
,
3
and
4
to
DATA SPLITTER
in
SIDE 1
. See Figure 7
below.
3. Close internal compartment – reinstall the home score digit panel or rear access cover.
4. Continue with step 4 on page 5.
F
IGURE
7 – F
OUR
S
IDED
S
COREBOARD
D
ATA
S
PLITTER
C
ONNECTIONS