Transition TN-USB-FX-01, Руководство пользователя

Страница: 18 / 25

Transition Networks TN-USB-FX-01 User Guide
33589 Rev. D https://www.transition.com/ Page 18 of 25
13. TCPChecksumOffloadV6 : Enable or disable the device to calculate the TCP checksum of the transmit
IPv6 packets and check the TCP checksum of the received IPv6 packets.
-Disabled Disable the TCP Checksum Offload
-TxEnabled Enable the TCP Checksum Offload for transmit packets
-RxEnabled Enable the TCP Checksum Offload for received packets
-RxTxEnabled Enable the TCP Checksum Offload for transmit and received packets
14. UDPChecksumOffloadV6 : Enable or disable the device to calculate the checksum of the transmit
IPv6 packets and check the UDP checksum of the received IPv6 packets.
-Disabled Disable the UDP Checksum Offload
-TxEnabled Enable the UDP Checksum Offload for transmit packets
-RxEnabled Enable the UDP Checksum Offload for received packets
-RxTxEnabled Enable the UDP Checksum Offload for transmit and received packets
15. IPChecksumOffloadV4 : Enable or disable the device to calculate the IP checksum of the transmit
IPv4 packets and check the IP checksum of the received IPv4 packets.
-Disabled Disable the IP Checksum Offload
-TxEnabled Enable the IP Checksum Offload for transmit packets
-RxEnabled Enable the IP Checksum Offload for received packets
-RxTxEnabled Enable the IP Checksum Offload for transmit and received packets
16. ArpOffload : When enable this ability, the device will reply the ARP request packet when computer is
suspending. This ability is activated only if WOL is enabled.
-Disabled Disable ARP Offload
-Enabled Enable ARP Offload
17. NSOffload : When enable this ability, the device will reply the neighbor solicitation packet when
computer is suspending.
This ability is activated only if WOL is enabled.
-Disabled Disable NS Offload
-Enabled Enable NS Offload
18. AutoDetach : Enable or disable AutoDetach ability. if AutoDetach is enabled, 3 seconds later after
Ethernet cable was unpluged, the device will be detached from USB.
-Disabled Disable AutoDetach
-Enabled Enable AutoDetach
-Use EEPROM Setting Disable or enable AutoDetach according to the EEPROM setting
19. MaskTimer : If wake up ability is enabled, the wake up function will delay this time to active.
-0,4,8,12,16,20,24,28 seconds
20. WolLinkSpeed : Set the Ethernet link speed when device sleeps if wake up ability is enabled.
-10 Mbps First The Ethernet link speed works on 10 Mbps first if available
-Use EEPROM Setting Use EEPROM setting to set Ethernet link speed