background image

Transition Networks, Inc.

   

 

 

 

 

          

PCVT-48VDC-53VDC Install Guide

 

33568 Rev. A 

www.transition.com/ 

Page 5 of 18 

Compliance Information 

Declaration of Conformity 

<

To be supplied.

 > 

UL Component Recognition 

The unit must be INSTALLED IN A RESTRICTED ACCESS location, in a UL 
APPROVED FIREPROOF ENCLOSURE. Components covered under this program 
are considered incomplete and are intended to be installed into another device, 
system or end-product. Components covered under UL's Recognition Service are 
only intended for factory installation, not field installation.  

CE Mark 

FCC Regulations 

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant 
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environment. This equipment generates, 
uses and can radiate radio frequency energy and, if not installed and used in accordance with the 
instruction manual, may cause harmful interference to radio communications. Operation of this equipment 
in a residential area is likely to cause harmful interference, in which case the user will be required to 
correct the interference at the user's own expense. 

Canadian Regulations 

This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus set out on 
the radio interference regulations of the Canadian Department of Communications.  

Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables 
aux appareils numériques de la Class A prescrites dans le Règlement sur le brouillage radioélectrique 
édicté par le ministère des Communications du Canada.

32B  

European Regulations 

WARNING:

 

This is a Class A product. In a domestic environment, this product could cause radio interference in which 

case the user may be required to take adequate measures. 

Achtung ! 

Dieses ist ein Gerät der Funkstörgrenzwertklasse A. In Wohnbereichen können bei Betrieb dieses 

Gerätes Rundfunkstörungen auftreten.  In diesem Fäll ist der Benutzer für Gegenmaßnahmen 

verantwortlich. 

Attention ! 

Ceci est un produit de Classe A.  Dans un environment domestique, ce produit risque de créer des 

interf

érences radioélectriques, il appartiendra alors à l’utilsateur de prende les measures spécifiques 

appropriées. 

 In accordance with European Union Directive 2002/96/EC of the European Parliament and of 

the Council of 27 January 2003, Transition Networks will accept post usage returns of this 

Содержание PCVT-48VDC-53VDC



















Отзывы: