8
J/E-PSW-FX-02
24-Hour Technical Support:
1-800-260-1312
-- International:
00-1--952-941-7600
Cable Specifications
The physical characteristics must meet or exceed IEEE 802.3™ specifications.
Fiber Cable
Bit Error Rate:
<10-9
single mode fiber
(recommended)
: 9 µm
Multimode fiber
(recommended)
:
62.5/125 µm
Multimode fiber
(optional)
:
100/140, 85/140, 50/125 µm
J/E-PSW-FX-02 (ST)
1300 nm multimode
Fiber Optic Transmitter Power:
min: -19.0 dBm
max: -14.0 dBm
Fiber Optic Receiver Sensitivity:
min: -30.0 dBm
max: -14.0 dBm
Link Budget:
11.0 dB
J/E-PSW-FX-02 (SC)
1300 nm multimode
Fiber Optic Transmitter Power:
min: -19.0 dBm
max: -14.0 dBm
Fiber Optic Receiver Sensitivity:
min: -30.0 dBm
max: -14.0 dBm
Link Budget:
11.0 dB
J/E-PSW-FX-02 (SM)
1310 nm single mode
Fiber-optic Transmitter Power:
min: -15.0 dBm
max: -8.0 dBm
Fiber-optic Receiver Sensitivity:
min: -31.0 dBm
max: -8.0 dBm
Link Budget:
16.0 dB
J/E-PSW-FX-02-100 (SC)*
1310TX/1550RX nm single mode
Fiber Optic Transmitter Power:
min: -13.0 dBm
max: -6.0 dBm
Fiber Optic Receiver Sensitivity:
min: -32.0 dBm
max: -3.0 dBm
Link Budget:
19.0 dB
J/E-PSW-FX-02-101 (SC)*
1550TX/1310RX nm single mode
Fiber-optic Transmitter Power:
min: -13.0 dBm
max: -6.0 dBm
Fiber-optic Receiver Sensitivity:
min: -32.0 dBm
max: -3.0 dBm
Link Budget:
19.0 dB
The fiber optic transmitters on this device meet Class I Laser safety
requirements per IEC-825/CDRH standards and comply with 21
CFR1040.10 and 21CFR1040.11.
* Single Fiber, install in pairs.
Copper Cable
Maximum cable distance: 100 meters
Category 3:
(
May be used for 10 Mb/s operation)
Gauge
24 to 22 AWG
Attenuation
11.5 dB/100m @ 5-10 MHz
Category 5:
(required for 100 Mb/s operation)
Gauge
24 to 22 AWG
Attenuation
22.0 dB /100m @ 100 MHz
• Straight-through (MDI) or crossover (MDI-X) cable may be used.
• Shielded (STP) or unshielded (UTP) twisted-pair may be used.
• Pins 1&2 and 3&6 are the two active pairs in an Ethernet network .
• Use only dedicated wire pairs for the active pins:
(e.g., blue/white & white/blue, orange/white & white/orange, etc.)
• Do not use flat or silver satin wire.
-- Click the
“Transition Now”
link for a live Web chat.
9
Cable Specifications
-- Continued
Technical Specifications
For use with Transition Networks Model J/E-PSW-FX-02 or equivalent.
Standards
IEEE 802.3™, IEEE 802.3ab™, 1998
Data Rate:
10 Mb/s, 100 Mb/s
Dimensions
76 x 100 x 25 mm
(3 x 3.9 x 1 inches)
Weight
181 g
(6 oz.)
approximately
Power Consumption:
2.5 W
Power Supply
12 VDC, 0.5 A
(North America)
12 VDC, 0.41 A
(Europe, Japan, Latin America)
12 VDC, 1.25 A
(N. Z., Australia, U.K., South Africa)
(The external power supply provided with this product
is UL listed by the power supply’s manufacturer.)
Packet Size:
Memory: 48K bytes
(384 Kbits)
Unicast MAC addresses: 2 K
Maximum packet size: 1522
(if 802.3ac tagged)
1518
(not tagged)
bytes
MTBF 50,000
hours
(MIL217F2 V5.0) (MIL-HDBK-217F)
125,000 hours (Bellcore7 V5.0)
Environment
Tmra*:
0 to 50°C
(32 to 122°F )
Storage Temp:
-20 to 85°C
(-4 to 185°F )
Humidity
5 to 95%, non condensing
Altitude
0 to 10,000 feet
Warranty
Lifetime
*Manufacturer’s rated ambient temperature.
The information in this user’s guide is subject to change. For the most up-to-date
information on the J/E-PSW-FX-02 media converter, view the user’s guide on-line
at: www.transition.com.
Product is certified by the manufacturer to comply with DHHS Rule 21/CFR,
Subchapter J applicable at the date of manufacture.
CAUTION:
Visible and invisible laser radiation when open. Do not stare into
the beam or view directly with optical instruments.
CAUTION:
Use of controls, adjustments or the performance of procedures other
than those specified herein may result in hazardous radiation exposure.
Crossover Cable
1
2
3
6
Straight-Through Cable
Twisted Pair #1
Twisted Pair #1
Twisted Pair #2
Twisted Pair #2
1
2
3
6
1
2
3
6
1
2
3
6
