EO2P User Guide |Page 48
33706 Rev. A
Technical Specifications
Transition Networks’ EO2Pxx4052-111 was designed to meet these specifications:
Standards
IEEE 802.1p, IEEE 802.1Q, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af/at,
IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Ingress Protection
IP30
Data Speed
TP – 10/100/1000Mbs. SFP –100/1000Mbs.
10/100/1000BaseT
Twisted Pair Port
• Connector: RJ45 female
• MDI/MDI-X selection: Automatic
• Cable specification: CAT5 UTP
Fiber Port
• Connector: SFP
• Modes: 1000Base-X, 100Base-FX,
SGMII
Console Port
RS-232 internal 4-pin header to TN11182 serial port debug board, 57600
baud
RESET Switch
Configuration/RESET pushbutton switch; press and hold the RESET button
on the back panel for a fixed amount of time;
see
Back Panel RESET Button
Functions
on page
44
.
Power Source
4-Pin mini DIN or 2-Pin Terminal Block: 48VDC
48V wall adapter, 4 pin mini DIN (TN 25148)
Power Consumption
45 Watts max. See
Throughput, Power, and
Distance Worksheets
on
page
51
.
Dimensions
EO2Pxx4052-111: 3.25” [82.5 mm] Wide x 1.25" [31.75 mm] Deep x
5.38” [136.7 mm] High
Power Adapter: 2.25 x 6 x 1.31 inches (5.72 x 15.25 x 3.32 cm)
Weight
EO2xxx4052-111: 0.85 lb. (0.39 Kg.)
Power Adapter: 0.99 lb. (0.45 Kg.) (not incl. power cord)
Environment
Operating: 0°C to +65°C (Indu85°C SFP modules must be used
above 50°C ambient temperature)
Storage: -40°C to 85°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft.
Compliance
Safety: External Power Supply: CE Mark;
Emissions: FCC Part 15, CISPR22/EN55022
Class A; Immunity: EN55024
MTBF
Greater than 200,000 MIL-HDBK-217F Hours
Warranty
5 years
