Transition Networks E-MMR-2, Руководство пользователя

Страница: 10 / 12

Ethernet™ 2-Port 12 7 Multi Media Repeater
3. INSTALLATION
To install the Multi Media Repeater:
• Unpack the Multi Media Repeater.
•
Install Multi Media Repeater on flat surface.
• Optionally install Slide In Cards.
• Connect Cable to SIC connectors and/or AUI connector.
• Connect Multi Media Repeater to power.
Direction is provided in the pages that follow.
Unpacking the Multi Media Repeater
The Multi Media Repeater packing contents should include the
following:
Item Part Number
Multi Media Repeater
Hub
E-MMR-2
Power Supply Adapter 3500, 3501, 3506, 3508, or 3510
(depending upon power configuration
in country where installed)
User’s Guide 7346
In addition, any of the following optional SICs may be included:
Item Part Number
Thinnet Coaxial E-CX-SIC
Fiber Optic E-FRL-SIC
Twisted Pair E-TBT-SIC
Female AUI E-AUI-DT-SIC
Male AUI E-AUI-DC-SIC
Bridge E-BR-SIC
Redundant Fiber Optic E-FL/RED-SIC
Female AUI Connector/10Base5, Transceiver Connection
The female AUI card (E-AUI-DT-SIC) provides a female AUI connector
for connection to 10Base5 through an AUI drop cable or to 10Base2,
10BaseT, or10BaseFL through a transceiver NOTE: The bridge card (E-
BR-SIC) also provides a female AUI connector.
Connecting 10Base5 Using AUI Drop Cable
To connect 10Base5 Cable to 8-Port 10BaseT female AUI connector:
1. Locate or build IEEE 802.3
compliant AUI drop cable.
2. Connect AUI drop cable
male DB-15 connector to
the 8-Port 10BaseT AUI
connector.
3. Connect AUI drop cable
female DB-15 connector to
the AUI port on a
transceiver or media attachment unit (MAU).
Connecting to Network Using Transceiver
To connect 8-Port 10BaseT to network using transceiver:
1. Locate IEEE 802.3 compliant transceiver with male AUI DB-15
connector and correct network media connector.
2. Connect transceiver male AUI DB-15 connector to the 8-Port
10BaseT female AUI connector.
3. Connect transceiver network media connector to the network
media.