INSTALLATION
CAUTION: Wear a grounding device and observe electrostatic
discharge precautions when setting switch and when installing Media
Converter Slide-in-Module in the media conversion center. Failure to
observe this caution could result in damage to, and subsequent failure
of, the Media Converter Slide-in-Module.
Set Loopback Test Switch
NOTE: The Loopback Test switch, located on Media Converter Slide-in-
Module front panel, allows the network
administrator to enable a loopback test for
installation and network debug procedures.
Use small flatblade screwdriver or similar
device to set
Loopback Test switch.
Set 4-Position Switch
Use small flatblade screwdriver or
similar device to set mode switches
located on
Media Converter Slide-in-
Module
circuit board.
NOTE: E1
MUST
BE SELECTED (by setting
#4: DOWN) FOR PROPER OPERATION.
CABLE SPECIFICATIONS
Fiber Cable
Bit error rate:
1 0
-9
MULTIMODE
Fiber Optic Cable Recommended:
62.5 / 125 µm multimode fiber
Optional:
100 / 140 µm multimode fiber
85 / 125 µm multimode fiber
50 / 125 µm multimode fiber
CSDTF3011-110
850 nM
Fiber Optic Transmitter Power:
min: -14.0 dBm
max: -12.0 dBm
Fiber Optic Receiver Sensitivity:
min: -25.0 dBm
max: -12.0 dBm
Typical
Maximum Cable Distance*: 2 kilometers
CSDTF3013-110
850 nM
Fiber-optic Transmitter Power:
min: -14.0 dBm
max: -12.0 dBm
Fiber-optic Receiver Sensitivity:
min: -25.0 dBm
max: -12.0 dBm
Typical
Maximum Cable Distance*: 2 kilometers
SINGLEMODE
Fiber Optic Cable Recommended:
9 µm singlemode fiber
CSDTF3012-110
1300 nM
Fiber-optic Transmitter Power:
min: -21.0 dBm
max: -14.0 dBm
Fiber-optic Receiver Sensitivity:
min: -25.0 dBm
max: -14.0 dBm
Typical
Maximum Cable Distance*: 8 kilometers
CSDTF3014-110
1300 nM
Fiber-optic Transmitter Power:
min: -21.0 dBm
max: -14.0 dBm
Fiber-optic Receiver Sensitivity:
min: -27.0 dBm
max: -14.0 dBm
Typical
Maximum Cable Distance*: 8 kilometers
CSDTF3015-110
(long haul)
1300 nM
Fiber-optic Transmitter Power:
min: -15.0 dBm
max: -5.0 dBm
Fiber-optic Receiver Sensitivity:
min: -27.0 dBm
max: -14.0 dBm
Typical
Maximum Cable Distance*: 15 kilometers
CSDTF3022-110
(long haul)
1300 nM
Fiber-optic Transmitter Power:
min: -15.0 dBm
max: -5.0 dBm
Fiber-optic Receiver Sensitivity:
min: -25.0 dBm
max: -14.0 dBm
Typical
Maximum Cable Distance*: 15 kilometers
*Actual distance dependent upon physical characteristics of network
installation.
CSDTF30xx
9
4
KEY
= UP
= DOWN
