CSDTF30xx IN THE NETWORK
NOTE: E1 MEDIA CONVERTERS MUST BE USED IN PAIRS. A TRANSITION
Networks CSDTF30xx stand-alone media converter can be used with another
CSDTF30xx stand-alone media converter, with a SSDTF30xx chassis media
converter, or with a previous model TRANSITION Networks T1/E1 media
converter, such as a C/T1E1-CF-01 or a T1E1-CF-01.
Media converter is framing independent (as ESF vs D4) and supports all
common line codes, (AMI, B8ZS, HDB3).
All Ones Insertion (AIS) on loss of signal at copper and/or fiber interface.
TECHNICAL SPECIFICATIONS
Standards
Emissions: CISPR A
E1 Physical Layer: ITU-T, TBR12 British Technical
Publication: PD7024 (NTR4), ANSI, AT&T, ETSI,
EN 45001
Dimensions
2.9" x 4.8" x 1.4"
Weight
8 oz (approximate)
Power Consumption
5 watts
Environment
Typical Operating Temperature*: 0°
to
50°C (32°
to
122°F )
Storage Temperature:
-20°
to
85°C (-4°
to
185°F)
Humidity
10-90%, non condensing
Altitude
0-10,000 feet
Warranty
Lifetime
*Operating temperature range for this Slide-In-Module depends on the physical
characteristics and the installation configuration of the TRANSITION Networks
chassis in which this Slide-In-Module will be installed. See the User’s Guide
for
the chassis in which this Slide-In-Module will be installed
for a discussion of
temperature-related installation constraints.
CSDTF30xx
11
2
DECLARATION OF CONFORMITY
Name of Mfg:
Transition Networks
6475 City West Parkway, Minneapolis MN 55344 USA
Model:
CSDTF30xx Series E1 Coax Copper-to-Fiber Media Converter
Part Number:
CSDTF3011-110, CSDTF3012-110, CSDTF3013-110,
CSDTF3014-110, CSDTF3015-110, CSDTF3022-110
Regulation:
EMC Directive 89/336/EEC
Purpose: To declare that the
CSDTF30xx
to which this declaration refers is in
conformity with the following standards.
EN 55022:1994; EN 55024:1998; FCC Part 15 Class A; EN 60950 A4:1997; UL 1950
I, the undersigned, hereby declare that the equipment specified above conforms to the above
Directive(s) and Standard(s).
_July 8, 2001_____
Stephen Anderson, Vice-President of Engineering
Date
