background image

Trademark Notice

All trademarks and registered trademarks are the property of their respective owners.

Copyright Restrictions

© 2001, 2004 Transition Networks.  All rights reserved.  No part of this work may be
reproduced or used in any form or by any means - graphic, electronic, or mechanical -
without written permission from Transition Networks.
Printed in the U.S.A.

33213.B

Compliance Information

UL Listed; C-UL Listed (Canada); CE Mark
CISPR22/EN55022 Class A

FCC Regulations

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC rules.  These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment.  This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications.  Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the user will be required to correct the
interference at the user's own expense.

Canadian Regulations

This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus
set out on the radio interference regulations of the Canadian Department of Communications.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de la Class A prescrites dans le Règlement sur le
brouillage radioélectrique édicté par le ministère des Communications du Canada.

European Regulations

Warning  

This is a Class A product.  In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

Achtung!  

Dieses ist ein Gerät der Funkstörgrenzwertklasse A.  In Wohnbereichen können

bei Betrieb dieses Gerätes Rundfunkstörungen auftreten, in weichen Fällen der Benutzer für
entsprechende Gegenmaßnahmen werantwortlich ist.

Attention!  

Ceci est un produit de Classe A.  Dans un environment domestique, ce produit

risque de créer des interférences radioélectriques, il appartiendra alors à l'utilsateur de
prende les measures spécifiques appropriées.

Declaration of Conformity

Name of Mfg:

Transition Networks 

6475 City West Parkway, Minneapolis MN 55344 USA

Model:

Redundant Power Supply

Part Number(s):

CPSMP-130, CPSMP-140

Regulation:

EMC Directive 89/336/EEC

Purpose: To declare that the

CPSMP-130 

and 

CPSMP-140 

to which this

declaration refers are in conformity with the following standards.

EN 55022:1988 + A1:2000 Class A; FCC Part 15 subpart B; UL 1950

I, the undersigned, hereby declare that the equipment specified above conforms to the above

Directive(s) and Standard(s).

     June 8, 2001               

Stephen Anderson, Vice-President of Engineering

Date

Содержание CPSMP-130








Отзывы: