6
CGFEB10xx-12x
24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600
Installation—continued
Install the cable
Port 1: 10/100/1000Base-T Copper Port
1.
Locate a 10/100/1000Base-T compliant copper cable with male, RJ-45
connectors installed at both ends.
2.
Connect the RJ-45 connector at one end of the cable to the media converter’s
10/100/1000Base-T, RJ-45port
(port 1).
3.
Connect the RJ-45 connector at the other end of the cable to the
10/100/1000Base-T, RJ-45 port on the other device
(switch, workstation, etc.)
.
Note:
The AutoCross feature
(when enabled)
allows the use of either straight-
through or crossover configuration cables.
RJ-45 Port
Media Converter
RJ-45 Port
On other device
(workstation, switch, etc.)
[email protected] -- Click the “Transition Now” link for a live Web chat.
7
CGFEB10xx-12x
Installation -- continued
Port 2: 1000Base-X Fiber Port
1.
Locate a 1000Base-X compliant fiber cable with male, two-stranded TX to RX
connectors installed at both ends.
2.
Connect the fiber cables to the media converter’s 1000Base-X fiber port
(port
2)
as described:
•
Connect the male TX cable connector to the female TX connector.
•
Connect the male RX cable connector to the female RX connector.
3.
Connect the fiber cables to the 1000Base-X fiber port on the other device
(another media converter, hub, etc.)
as described:
•
Connect the male TX cable connector to the female RX connector.
•
Connect the male RX cable connector to the female TX connector.
Connect fiber cable
to media converter
as shown.
Connect fiber cable
to other device
(media converter,
hub, etc.)
as shown
RX
TX
RX
TX
