User’s Guide
CGFEB10xx-12x
Slide-in-Module Media
Converter
•
Copper to Fiber
•
10/100/1000Base-T to 1000Base-SX/LX
Transition Networks CGFEB10xx-12x series media
converters, designed to be installed in a PointSystem
™
chassis connect 10Base-T, 100Base-TX, or 1000Base-T
twisted-pair copper cable to 1000Base-SX or 1000Base-
LX fiber devices.
The CGFEB10xx-12x has one copper port and one fiber-
optic port.
CGFEB10xx-12x
Part Number
Port 1 - Copper
10/100/1000-Base-T
Port 2 - Duplex Fiber-Optic
CGFEB1013-120
RJ-45
100 m
(328 ft)
SC, 1000Base-SX, 850nm multimode
220/550m
(720/1,805 ft)
CGFEB1014-120
RJ-45
100 m
(328 ft)
SC, 1000Base-LX, 1310nm single mode
10 km
(6.2 miles)
CGFEB1015-120
RJ-45
100 m
(328 ft)
SC, 1000Base-LX, 1310nm single mode
25 km
(15.5 miles)
CGFEB1017-120
RJ-45
100 m
(328 ft)
SC, 1000Base-LX, 1550nm single mode
65 km
(40.4 miles)
CGFEB1024-120
RJ-45
100 m
(328 ft)
SC, 1000Base-LX, 1300nm multimode
2 km
(1.2 miles)*
CGFEB1035-120
RJ-45
100 m
(328 ft)
SC, 1000Base-LX, 1550nm single mode
120 km
(77.5 miles)
CGFEB1040-120
RJ-45
100 m
(328 ft)
1000Base-X SFP slot
(empty)
*The CGFEB1024 extends 1000Base-LX beyond 220 meters. Transition Networks
cannot guarantee a full 2km distance on every installation since the distance is largely
dependent on the quality of the fiber cable installation and splicing.
Distances
Distances listed are the typical maximum cable distances. Actual distance is dependent
on the physical characteristics of the network these devices are operating on.
Installation . . . . . . . . . . . . . . . . . . .3
Operation . . . . . . . . . . . . . . . . . . .8
Diagnostic Monitoring Interface
(DMI) . . . . . . . . . . . . . . . . . . . . . .14
Cable Specifications . . . . . . . . . . .15
Technical Specifications . . . . . . . .17
Troubleshooting . . . . . . . . . . . . .18
Contact Us . . . . . . . . . . . . . . . . .19
Compliance Information . . . . . . .20
