12
CFMFFxxxx-2xx
24-hour Technical Support: 1-800-260-1312 – International: 00-1-952-941-7600
Cable Specifications
– Continued
1.25 Gb/s fiber specifications
(CFMFF14xx-22x)
Bit error rate:
<10-12
Port 1:
CFMFF1414-220
1310 nm singlemode
Fiber-optic Transmitter Power:
min: -13.0 dBm
max: -3.0 dBm
Fiber-optic Receiver Sensitivity:
min: -20.0 dBm
max: -3.0 dBm
Link Budget:
7.0 db
Port 2:
CFMFF1414-220
1310 nm singlemode
Fiber-optic Transmitter Power:
min: -13.0 dBm
max: -3.0 dBm
Fiber-optic Receiver Sensitivity:
min: -20.0 dBm
max: -3.0 dBm
Link Budget:
7.0 db
Port 1:
CFMFF1424-220
1310 nm singlemode
Fiber-optic Transmitter Power:
min: -13.0 dBm
max: -3.0 dBm
Fiber-optic Receiver Sensitivity:
min: -20.0 dBm
max: -3.0 dBm
Link Budget:
7.0 db
Port 2:
CFMFF1424-220
1300 nm extended multimode
Fiber-optic Transmitter Power:
min: -10.0 dBm
max: -3.0 dBm
Fiber-optic Receiver Sensitivity:
min: -17.0 dBm
max: -3.0 dBm
Link Budget:
7.0 db
Port 1:
CFMFF1429-220
1310 nm singlemode
Fiber-optic Transmitter Power:
min: -13.0 dBm
max: -3.0 dBm
Fiber-optic Receiver Sensitivity:
min: -20.0 dBm
max: -3.0 dBm
Link Budget:
7.0 db
Port 2:
CFMFF1429-220
1310 nm singlemode
Fiber-optic Transmitter Power:
min: -8.0 dBm
max: -3.0 dBm
Fiber-optic Receiver Sensitivity:
min: -21.0 dBm
max: -3.0 dBm
Link Budget:
13.0 db
1.25 Gb/s Fiber Specifications
(CFMFF1825-220)
Bit error rate:
<10-12
Port 1:
850 nm multimode
Fiber-optic Transmitter Power:
min: -10.0 dBm
max: -4.0 dBm
Fiber-optic Receiver Sensitivity:
min: -17.0 dBm
max: 0.0 dBm
Link Budget:
7.0 db
Port 2:
1310 nm singlemode
Fiber-optic Transmitter Power:
min: -11.0 dBm
max: -3.0 dBm
Fiber-optic Receiver Sensitivity:
min: -20.0 dBm
max: -3.0 dBm
Link Budget/Spectral Width:
9.0 db/7.0 nm FWHM
13
[email protected] – Click the “Transition Now” link for a live Web chat.
Technical Specifications
Applies to Transition Networks Model CFMFFxxxx-2xx or equivalent
Standards
IEEE 802.3™ 1998 Fast Ethernet, ATM, OC-3,
STM-1, HSTR, FDDI
Dimensions
3.4" x 0.86" x 5.0"
(86 mm x 22mm x 127mm)
Weight
3 oz (91 g) (approximate)
MTBF
650,318 hours
(MIL217F2 V5.0) (MIL-HDBK-217F)
1,793,425 hours
(Bellcore7 V5.0)
Delay
623 Mbps - 1 Gbps:
1 nsec
156 Mbps - 622 Mbps:
2 nsec
125-155 Mbps:
3 nsec
<125 Mbps:
7 nsec
Power Consumption
3.0 watts
(typical)
Environment
Tmra*:
0°C to 50°C
(32°F to 122°F )
Storage Temp:
-20°C to 85°C
(-4°F to 185°F )
Humidity:
10 to 90%, non condensing
Altitude:
0 to 10,000 feet
Warranty
Lifetime
*Manufacturer’s rated ambient temperature: “Tmra” range for this slide-in-
module depends on the physical characteristics and the installation configuration
of the Transition Networks PointSystem™ chassis in which this slide-in-module
will be installed.
Note:
The CFMFFxxxx-2xx media converters are for use in Transition Networks’
model CPSMCxxxx-xxx chassis only. See the CPSMCxxxx-xx chassis
manuals, available on-line @ www.transition.com, for information about
the chassis.
Note:
For the most up-to-date information on the CFMFFxxxx-2xx media
converter, view the user’s guide on-line @ www.transition.com
Note
The SFMFFxxxx-2xx model is the stand alone version of the media
converter. For more information, see the user’s guide on-line at:
www.transition.com.
The fiber optic transmitters on this device meet Class I Laser safety requirements
per IEC-825/CDRH standards and complies with 21 CFR1040.10 and
21CFR1040.11.
Product is certified by the manufacturer to comply with DHHS Rule 21/CFR,
Subchapter J applicable at the date of manufacture.
CAUTION: Visible and Invisible Laser Radiation When Open. Do Not Stare Into
Beam Or View Directly With Optical Instruments.
CAUTION: Use of controls, adjustments or the performance of procedures other
than those specified herein may result in hazardous radiation exposure.
