4
Testing
The GTS600 safely tests for proper ESD protection. The
GTS600 can function as solely a wrist strap tester or in
combination with the GTS600FT as duel wrist strap and
foot wear tester.
Wrist Strap Testing
1. While wearing wrist strap, plug banana plug end of
cord in the jack labeled “WRISTCORD”
2. Press rocker switch toward “WRISTCORD”.
3. Press the test button and hold for 2-3 seconds.
Free Standing Installation Cont.
2. Line up
pedestal A
with four screw base mount on foot-
plate and attach with the four screws. Tighten with HEX
wrench.
3. Slide
pedestal B
on to
pedestal A.
4. Line up Monitor with mounting screws and gently pull
down to lock in place.
5. Install the 4” banana plug connector into jack labeled
“FOOT PLATE” on the left side of unit.
6. Locate the connection screw and two bolts on the under-
side of monitor mount and unscrew first bolt.
7.
Place eye of plug connector on screw and return bolt and
gently tighten it with fingers.
