Transduction TR-5001 Скачать руководство пользователя

Страница: 20 / 104

Features

•

Support Pentium 4 Prescott (90nm) and Northwood(0.13um) CPU

with 400/533/800M FSB speed selectable. Intel VRD 10.1

compliant to support future advanced processor.

•

Dual Channel Memory bus doubles the data rate, up to

6.4GBytes/s. System memory speed can be DDR266,330 or 400,

selectable by BIOS setup.

•

Dual SATA ports with classic IDE, RAID0 or RAID 1 mode

configurable. Rebuild supported at RAID 1 mode with Intel IAA

software.

•

Dual Intel Gigabit Ethernet controller on board boost networking

throughputs up to 4Gbits/s in full-duplex mode.

•

Support Server-grade LAN features like Teaming,

Load-balancing and Fault-Tolerance in wire-speed.

•

Boot Agent with both RPL and PXE protocol support is integrated

in system BIOS for remote Boot functions.

•

LAN LED built-in RJ45 connector to display Speed, Link an

activities. External connector is available to display LAN status

on front Panel.

•

Two serious ports. One is RS232/422/485 selectable for remote

control and data access.

•

AC97 3D Audio CODEC on-board with Line-IN, Line-OUT,

Microphone and CD-IN interface. Audio + USB 2.0 cable kit is

available.

•

One LVDS connector supports diffused LVDS TFT 18-bits panels.

LVDS cable kit is available.

•

On-Board AT-P8 and ATX-12V Power connector support

stand-alone system configuration.

•

Four USB2.0 ports. USB2.0 cable kit is available to mount UBS

connector on chassis or bracket.

•

Support Hardware Monitor and Watch-Dog timers. System will

alert administrators while abnormal operation condition

happened.

•

Support remote wake up on LAN and Modem.

TR-5001 User Manual

Содержание TR-5001









































































































Результаты поиска

Содержание TR-5001

Отзывы:

Похожие инструкции для TR-5001

Бренды по названию

Популярные бренды

Transduction TR-5001, Руководство пользователя

Результаты поиска

Содержание TR-5001

Отзывы:

Похожие инструкции для TR-5001

Бренды по названию

Популярные бренды