1
The RFID End Cap Reader may not be modified, altered, or changed in any way
without permission from TransCore, LP. Unauthorized modification may void the
equipment authorization from the FCC and will void the TransCore warranty.
See the DAP
CE5000B Handheld Mobile Computer User Guide
for pertinent
regulatory information for the CE5240B or CE5240BWE equipment. This
document is available online at
www.daptech.com
.
Introduction
This guide describes the operation of the TransCore RFID End Cap Reader when
used with the DAP Model CE5000B-series (CE5240B or CE5240BWE) Mobile
Computer. These components, which combined, comprise
TransCore’s
Encompass 1d Handheld Reader. This document describes procedures to set up
and read from and/or write to tags using the Encompass 1d Handheld Reader.
Please refer to
CE5000B Handheld Mobile Computer User Guide
for
comprehensive user information about the DAP Model CE54200B or CE5240BWE
Mobile Computer.
Before Getting Started
TransCore’s Encompass 1d Handheld Reader is designed to read from TransCore
eGo
®1
tags, ATA, Wiegand, and CALTRANS Title 21 tags; and read from or write
to eGo Plus tags and TransCore Intellitag 2000 (Allegro) tags,
Handheld Reader Setup Instructions
To set up the basic Encompass 1d Handheld Reader, you will need the following
items:
TransCore Encompass 1d Handheld Reader
TagReader Demo software program preloaded on the DAP
CE5000B-series (CE5240B or CE5240BWE) Mobile Computer
Encompass 1d reader Ethernet office cradle with AC adapter and
power cord
1
eGo tags are fully compliant with the American National Standards Institute INCITS 256-
2001 and International Organization for Standardization 18000-6B standards.
