TransCore Encompass 1, Быстрый старт

Страница: 2 / 16

2
•
Two #6-32 handle-to-computer retaining screws. These screws are located in the scan handle box in an
accessories packet.
•
Slotted-head screwdriver and Phillips-head screwdriver
•
Scan handle battery pack charger with universal AC adapter and power cord
•
700 Color Mobile Computer single dock/charging station with universal AC adapter and power cord
Installing and Removing the Scan Handle Battery Pack
Before you can use the scan handle, you must charge its battery. The charging process takes approximately four
hours.
To remove the battery pack
Push the battery release latch forward and remove the battery pack from the handle (Figure 2).
Figure 2 Location of Battery Release Latch on Scan Handle
To re-install the battery into the scan handle
The tab at the top of the battery pack fits into the notch in the compartment (Figure 3). Insert the battery (tilt to fit
into notch) into the compartment opening and press in until the latch on the bottom of the battery snaps closed.