11
HTP
means the port will output the one with higher value between the
universal of principle and secondly. The unit will compare the two universal and
resend the higher data to the network. They can be set within the range of
0.0-F.F./001-255. (These two formats can be change through Display Mode)
Please note that in the HTP mode, you should ensure the Resend option
is not at the status of
Disabled. Or it won’t resend the data to the network.
RDM
means the port output can support Remote Device Manager.
3) 1-4 DMX port disabled
Any of the port 1-4 can be set as Disabled status. Upon the port has been set
as Disabled status, the DMX port will be disabled, it cannot send or receive any
data from now on.
Please note that the Frame rate/fs only available for Output status; The
Secondly and Resend option only available for the HTP/LTP mode under
the status of Output.