Transcend TS-AVE3, Руководство пользователя

Страница: 44 / 57

• • • • •
ACPI Suspend Type
Select the ACPI Suspend Type : “S1 (POS)” or “S3 (STR)”.
If your expansion cards do not support the STR function, you must leave this field on “S1
(POS)” setting. STR (Suspend-to-RAM) is an energy-saving feature. It takes only a few
seconds to wake up the system and return H to its previous situation.
NOTE: This feature (STR) requires an ATX power supply with at least 720mA and 5V
standby power for the Advanced Configuration and Power Interface (ACPI) functions.
Otherwise, the system will fail to return from suspend mode.
40
BIOS SETUP
•
Video Off Method
Defines the Video Off features
-Blank Screen: Only blanks the screen. Use this for monitors without power management
and “green” features.
-V/H SYNC+Blank: Blanks the screen and turns off vertical and horizontal scanning
-DPMS Support: The DPMS (Display Power Management System) feature allows the
BIOS to control the video display card if it supports the DPMS feature.
•
PM Control by APM
When “Yes”, an Advanced Power Management device will be activated to enhance the Max.
Power Saving mode and stop the CPU internal clock.
•
VIDEO Off Option
When “Enabled”, this function allows the VGA adapter to operate in a power saving mode.
-Always On: Monitor will remain on during power saving modes.
-Suspend Off: Monitor blanked when the system enters the supend mode.
-All Modes: Monitor blanked when the system enters any power saving mode.
•
MODEM Use IRQ
You can select one of the following interrupt resources for modem use: “N/A”, “3”, “4”, “5”,
“7”, “9”, ”10”, and “11”.
•
Soft-Off by PWRBTN
When set to “Instant-off”, the ATX switch can be used as a normal system Power Off button.
When set to “Delay 4 seconds”, you need to press the ATX switch down for more than 4
seconds if you want to Power Off the system.