Transcend TS-AVE3, Руководство пользователя

Страница: 39 / 57

BIOS SETUP
35
• •
• •
•
Primary/Secondary Master/Slave PIO
The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each
of the four IDE devices that the onboard IDE interface supports. Mode 0 through 4 provide
successively increased performance. In “Auto” mode, the system automatically determines
the best mode for each device.
• •
• •
•
Primary/Secondary Master/Slave UDMA
Ultra DMA/33(66) implementation is possible only if your IDE hard drive can support it and
the operating environment includes a DMA driver (Windows 95 OSR2 or a third-party IDE
bus master driver). If both your hard disk drive and your system software can support Ultra
DMA/33(66), select “Auto” to enable BIOS support.
•
Init Display First
This item allows you to decide whether to activate either the “PCI Slot” or the “AGP first”.
• •
• •
•
IDE HDD Block Mode
Block Mode is also called Block Transfer, Multiple Commands, or Multiple Sector Read/
Write. If your IDE hard drive supports Block Mode (most new drives do), select “Enabled”
for automatic detection of the optimal number of Block Read/Writes per sector that the drive
can support.