Transcend TS-AVD3, Руководство пользователя

Страница: 38 / 51

34
BIOS SETUP
•
HDD Power Down
After the selected period of driver inactivity(1 to 15 minutes), the hard disk drive will be
Power Down while all other devices remain active.
•
Doze Mode
After the selected period of system inactivity (1 minute to 1 hour), the CPU clock runs at
slower speed while all other devices still operate at full speed.
•
Suspend Mode
After the selected period of system inactivity (1 minute to 1 hour), all devices except the
CPU shut off.
** PM Events **
PM events are I/O events whose occurrence can prevent the system from entering a power
saving mode or can awaken the system from such a mode. In effect, the system remains alert
for anything which occurs to a device which is configured as “On” even when the system is in
power saving mode.
•
VGA
When set to “On” (default), any event occurring at a VGA port will awaken a system which
has been Powered Down.
•
LPT & COM
When set to “LPT/COM” (default), any event occurring at a COM(serial)/LPT (printer) port
will awaken a system which has been Powered Down.
•
HDD & FDD
When set to “On” (default), any event occurring at a hard or floppy drive port will awaken
a system which has been Powered Down.
•
DMA/Master
When set to On (default), any event occurring at will awaken a system which has been
Powered Down.
•
Modem Ring Resume
This allows either setting of “Enabled” or “Disabled” for Power Up the computer when the
MODEM receives a call and the computer is in the soft-off mode.