BIOS SETUP
33
•
PM Control by APM
When “Yes”, an Advanced Power Management device will be activated to enhance the Max.
Power Saving mode and stop the CPU internal clock.
•
Video Off Method
Determines the manner in which the monitor is blanked.
-V/H SYNC+BLANK :
System turns off vertical and horizontal synchronization ports
and writes blanks to the video buffer.
-DPMS Support :
The DPMS (Display Power Management System ) feature allows
the BIOS to control the video display card if it supports this
function.
-Blank Screen :
System only writes blanks to the video buffer.
•
Video Off After
Select the power-saving modes during which the monitor goes blank.
-Doze : Monitor remains “on” during Doze modes.
-Suspend : Monitor blanked when system enters Suspend mode.
-N/A : This is default. When system enters power-saving mode, it does not do the video off
action.
•
MODEM Use IRQ
You can select one of the following interrupt resources for MODEM use: “N/A”, “3”, “4”, “5”,
“7”, “9”, “10” and “11”.
•
Soft-Off by PWRBTN
When set to “Instant-off”, the ATX switch can be used as a normal system Power Off
button. When set to “Delay 4 sec”, you need to hold the ATX switch for more than 4 seconds
to Power Off your system.
Following are three Green PC power saving functions. They are user-configurable only during
User Defined Power Management mode.
Содержание TS-AVD3
Страница 51: ......
