Working environment
The calibrator units are designed to work safely under the following conditions:
Ambient temperature range: 5°C/9°F to 40°C/104°F
Humidity: Up to 95% relative humidity, non-condensing
Warning
Warning:
HIGH TEMPERATURES ARE DANGEROUS
Aviso:
LAS TEMPERATURAS ELEVADAS SON PELI
HIGH TEMPERATURES ARE DANGEROUS: They can cause serious burns to operators and ignite combustible
material. Accurate Thermal Systems has taken great care in the design of these units to protect operators from
hazards, but operators should pay attention to the following points:
• USE CARE AND WEAR PROTECTIVE GLOVES TO PROTECT HANDS
• DO NOT put hot objects on or near combustible objects
• DO NOT operate the unit close to inflammable liquids or gases
• DO NOT place any liquid directly in your unit
• At all times USE COMMON SENSE
Operator Safety
All operators of Accurate Thermal Systems equipment must have available the relevant literature needed to
ensure their safety. It is important that only suitably trained personnel operate this equipment in accordance with
the instructions contained in this manual and with general safety standards and procedures. If the equipment is
used in a manner not specified by Accurate Thermal Systems, the protection provided by the equipment to the
operator may be impaired. All Accurate Thermal Systems units have been designed to conform to international
safety requirements. If a safety problem is encountered, switch off at the power socket and remove the plug
from the supply. Please use caution when removing probes and inserts as burns to the skin can occur if in
contact.
-3-
