TransAct EPIC 630 Скачать руководство пользователя страница 44

Страница: 44 / 200

8 ,

The standard control codes for the TransAct

EPIC 630 Printer are extensions and

subsets of the PcOS IBM emulation provided on other TransAct

products. In some

cases, an application designed for a Series 50 Printer with IBM code sets will function

with a TransAct

EPIC 630 Printer.

TransAct

Printer Control Language (IPCL) codes are part of PcOS and designed to

control a printer without using control characters (i.e. characters less than 20H). Only the

standard PcOS emulation supports IPCL.

In rare cases, an IPCL code will interfere with the text that is to be printed. The IPCL

translator can be disabled with an [ESC] y <4> command.

ESC/POS

is referred to here as EPOS. The TransAct

EPIC 630 Printer supports two

Epson emulations. One emulation is for the TM-T88, and the other is an enhanced TM-

T90 emulation. There is no Kiosk Specific Epson Emulation.

Specific EPSON compatibility features, such as its Automated Status Back

(ASB) feature, are available as an option from TransAct Technologies.

Command codes pertaining to these features are documented as

“licensed” within the command description.

It is intended that the standard TransAct

PcOS emulation be used for new

applications. Not all features of TransAct

EPIC 630 Printers are supported by

EPOS.

&##

" .

To aid application development, several chapters in this manual are designed to help the

programmer understand the TransAct

EPIC 630 Printer. The next chapter provides a

detailed description of each of the commands. Subsequent chapters provide

explanations of how the printer works, including a description of the internal print buffer,

communications link, and interaction between the host computer and printer.

Throughout this Programmer's Guide, charts and tables list commands and features. In

most cases, the charts cross-reference the page that describes the command. Code

summary charts, arranged by code and function, are provided to help quickly find

commands.

The following section defines the TransAct

EPIC 630 TransAct

PcOS emulation. The

native, TransAct

PcOS emulation provides the most flexibility and control over the

ESC/POS is a registered trademark of the Seiko Epson Corporation.

Содержание EPIC 630









































































































































































































Результаты поиска

Содержание EPIC 630

Отзывы:

Похожие инструкции для EPIC 630

Бренды по названию

Популярные бренды

TransAct EPIC 630, Руководство программиста

Результаты поиска

Содержание EPIC 630

Отзывы:

Похожие инструкции для EPIC 630

Бренды по названию

Популярные бренды