Installation Illustration
Before your operation, please read this manual carefully and keep this for further reference.
Application 1: Listen to the TV sound without turn the volume of TV loudly.
In this scenario, the Tx unit should be located around the TV set
Tx installation
Step1: Take out the main unit
Step2: Take a 3.5mm
Æ
Audio RL cable, connect the 3.5mm connector to the 3.5mm socket
on the Tx unit, another RL connector to the “Speaker out” or “line out” of your TV set
Step3: Take out the AC/DC adaptor, plug the barrel end to the DC socket of DAS-2420, the
AC blade end to your AC outlet, please be noted, DO NOT OVERLOAD YOUR AC
OUTLET.
Rx installation
Via AA Batteries powering
Step1: Take out the Rx unit
Step2: open the batteries compartment
Step3: Install 2 new AA batteries as figure shown (please make sure the polarity)
Step4: Close the Batteries compartment
4
Batteries
Close the compartment
Finished
DC jacket
Speaker out/line out
