Trans-Cal SSD120-A-RS Series, Инструкция для владельца и по установке

Страница: 27 / 39

-27-
Table V
Serial Port Connector, 15 Pin D-Subminiature DA-15S
Pin Function
1
Ground 10
2
Ground for 10' resolution.
3
RxD
4
TxD111
5
Ground10
6
)
7
RS485A(-)
8
Ground10
9
Protocol Select see Table VI
10
Protocol Select see Table VI
11
Spare
12
TxD211
13
Program Enable
14
Spare
15
Spare
Table VI
Protocol Selection: DA-15S D-Subminiature Connector Function Table
Protocol Selection
Pin Pin Pin
2 9 10
UPS AT 100' resolution, 1200bps.
Open Open Open
UPS AT 10' resolution, 1200bps.
Gnd. Open Open
Trimble/Garmin, 100' resolution, 9600bps.
Open Open Gnd.
Trimble/Garmin, 10' resolution, 9600bps.
Gnd. Open Gnd.
Northstar/Garmin, 100' resolution, 2400bps.
Open Gnd. Open
Northstar/Garmin, 10' resolution, 2400bps.
Gnd. Gnd. Open
Magellan, 100' resolution, 1200bps.
Open Gnd. Gnd.
Magellan, 10' resolution, 1200bps.
Gnd. Gnd. Gnd.
Note: These hardware jumpers will override any software settings from §4.6!
10
Pins 1 and 5 and 8 are internal grounds provided for protocol selection and serial data ground.
11
TxD1 and TxD2 are two (2) separate RS232 outputs which will transmit the protocol selected by grounding the pins
above, or will transmit separate protocols as assigned via software, see
§4.6 Serial Port Software Configuration.