Trans-Cal SSD120-A-RS Series, Инструкция для владельца и по установке

Страница: 15 / 39

-15-
4.5 Hyper Terminal Set-Up on the IBM Compatible PC:
Boot up the computer and start the Hyper Terminal program.
Hyper Terminal
may be located in the
Programs
section or in the
Accessories
section under
Communications
.
Under the
New Connection
window. (Identifies the new connection.)
-Choose an icon then select an identifying title such as “Test”.
Select
OK
after you have made your choices.
Under the
Connect to
window (Selects the Com port to use.)
-Choose
Connect Using Com 1
or whatever
Com
port you have
chosen to use. After your selection click on
OK.
Under the
Com ? Properties
, (Sets communication properties.)
Under the
Port Settings
tab, set the following:
Bits per second:
9600
Data bits:
8
Parity:
None
Stop Bits:
1
Flow Control:
None
Select
OK
In the
Hyper Terminal
window select
File
then click on
Properties
.
Under the
Com ? Properties
window click on the
Settings
tab.
Set the following:
Function, arrow, ctrl keys to act as
Terminal Keys.
Emulation to
Auto Detect
Under
ASCII Setup
Set the following:
Echo off.
Wrap lines that exceed terminal width.
Select
OK.
The software is now configured for operation.