User Manual
25
Notes:
After setting the “Language”, “Date” and “Time”, press the “down” key to
“ok”, and then press “enter” to save setting. If pressing “esc” to discard setting.
5.4.1.2. Safety Parameters Setting
pressing the
“
enter” key, you will find a pull-down menu. Please move the cursor
to “Safety Parameters” menu by pressing the “up” or down” key, and then press
“enter” key, you will come to the interface for “Safe Parameter”. At this interface,
you can choose the last or the next parameter, or increase or decrease the
parameters. These parameters contain “Safety”, “Vpv-Start”, “T-start”, “Vac-Min”,
“Vac-Max”, “Fac-Min”, “Fac-Max” and so on.
Notes: This operation step requires password (default value: 1001).
Figure 5-7 Password Input Interface
Figure 5-8 Safety Parameters Setting
After that, you can choose “ok”, “Default” to confirm parameter change, restore
original data . Press “OK” and exit this interface to enter main menu.
5.4.1.3. Clear Data
when pressing the
“
enter” key, you will find a pull-down menu. Choose “Clear
Data” menu and press “enter” to get into data clearing state. In this menu, press
“OK” to clear all the data in the memory, and if press “esc” exit this interface.
