Getting
Started
Trango Broadband Wireless — User Manual M2400S Rev. A
Page
8
Web Browser System Information Page
!
Note: System Information screen for the Subscriber Unit is similar and is covered in detail later in this text.
Primary Features and Pages of the Browser Interface
Navigation Column:
Each page features a navigation column, which runs along the left-hand side of the page.
The model number of the radio is listed at the top of the navigation column. On the bottom of the navigation
column is the Current Status of the radio that includes its Base ID, current Opmode, channel, antenna selection, and
frequency.
The navigation column also features links to each of the following pages:
System Information:
This page shows most of the basic configuration parameters of the radio. It is the first page
shown after login.
Configuration:
The essential parameters, such as Base ID, IP, subnet, gateway, channel, and antenna polarization
are set here.
Advanced Setup:
The advanced RF parameters, such as transmit power, receiver threshold control, and channel
center frequencies are set here.
Site Survey:
With Opmode “OFF,” the user can conduct a spectrum analysis using this page.
Subscriber Database:
This is the page for defining which SUs can associate to the AP.