4
6
©2020 Trane
Trane has a policy of continuous product and product data improvement and reserves
the right to change design and specifications without notice. We are committed to using
environmentally conscious print practices.
Trane - by Trane Technologies (NYSE: TT), a global climate innovator - creates
comfortable, energy efficient indoor environments for commercial and residential
applications. For more information, please visit trane.com or tranetechnologies.com.
Wiring and Applying Power
1. Connect one end of the provided IMC power cable to the IMC connection on the Tracer SC.
Connect the other end of the IMC power cable to the IMC connection on the power supply module.
2. Wire the 24 Vac input connection to a dedicated 24 Vac, Class 2 transformer.
3. Ensure the PM014 is properly grounded.
Important:
This device must be grounded for proper operation!
The factory-supplied ground
wire must be connected from any chassis ground connection on the device (
) to
an appropriate earth ground (
). The chassis ground connection can be the 24 Vac
transformer input at the device, or any other chassis ground connection on the
device.
Note:
Neither the Tracer SC nor the PM014 is grounded through the DIN rail connection.
4. Apply power to the Tracer SC by pressing the power button.
All status LEDs illuminate and the following sequence flashes on the 7-segment display:
8, 7, 6, 5, 4, L, dancing dash pattern
. The dancing dashes continue while the Tracer SC
is operating normally.
Note:
For more information see “Tracer SC Installation and Setup Guide,” BAS-SVX31,
and “Power Supply Module PM014 Installation, Operation, and Maintenance”, BAS-SVX33.
PM014
24
VAC
XFMR
OUT
24
VAC
24
VAC
XFMR
OUT
24
VAC
Tracer SC
IMC
connections
Note: A pigtail connection
should be used between the
chassis ground on the
device and an earth ground,
if the device is not grounded
through one leg of the
transformer wiring.
24 Vac output
24 Vac input
IMC cable
PM014
24 Vac Transformer
Specifications
Agency Listings and Compliance
The European Union (EU) Declaration of Conformity is available from
your local Trane
®
office.
Table 1.
Tracer SC Specifications
Power Requirements
(From PM014) 24 Vdc @ 0.3A; 14VA max (PM014 input VA).
Storage
Temperature:
-40°C to 70°C (-40°F to 158°F)
Relative humidity:
Between 5% to 95% (non-condensing)
Operating Environment
Temperature:
-40°C to 50°C (-40°F to 122°F)
Humidity:
Between 10% to 90% (non-condensing)
Input power:
24 Vac
Product weight
1 kg (2.2 lb.)
Altitude:
Maximum 2,000 m (6,500 ft.)
Installation:
Category 3
Pollution
Degree 2
BAS-SVN215J-EN 11 Dec 2020
Supersedes X39641154-01H (Mar 2016)
Tracer SC front panel
power
button
7-segment
display
