WALL-MOUNT AIR HANDLERS
2-3TON COOLING/HEAT PUMP
TMM5B0A24M21SAA
TMM5B0B30M21SAA
TMM5B0B36M31SAA
ALL phases of this installation must comply with NATIONAL, STATE AND LOCAL CODES
Important: This Document is customer property and is to remain with this unit.
Installer’s Guide
Section 1. Features
1.1 Standard Features
1.2 Optional Accessories
•
5, 7.5 and 10 kW SINGLE PHASE ELECTRIC
HEATERS
- Circuit breakers are standard on all single
phase 5, 7.5 and 10 kW heaters.
The TMM5B series wall mount air handler is designed for installation in a closet, utility room, alcove
and can be wall mounted. These versatile units are applicable to air conditioning and heat pump
applications. Field installed electric resistance heaters are available.
•
All aluminum coil.
•
Blower and coil slide out easily for maintenance.
•
Factory-sealed cabinet certified to achieve 2% or
less air leakage rate at 1.0 inch water column.
•
Front or bottom return air.
•
Painted finish on galvanized steel.
•
Sturdy polycarbonate drain pans.
- Air handler has factory installed drain pans and
is shipped for upflow applications only.
•
208/230 VAC operation.
•
Multi-speed direct drive blower constant torque
ECM motor with fan-off time delay programming.
•
Factory installed R-410A thermal expansion
valve.
•
Stud or wall mounting installation.
•
Fully insulated cabinet.
•
3/4'' NPT primary and secondary drains.
•
AHRI certifird and ETL listed.
18-GF13D1-1A-EN
