Trane Thermo King TriPac EVOLUTION, Руководство по установке

Страница: 47 / 96

TK 55676-19-IM-EN
47
Figure 25. Suction and Discharge Hoses Shown Correctly Routed and Secured
RCS1632
Hoses shown correctly routed and secured
with bandwraps to hose support bracket.
DISCHARGE HOSE ON TOP
SUCTION HOSE ON BOTTOM
Remove excess length
after tightening
Remove bottom panel
Underside of APU showing hoses correctly routed and
secured with bandwraps to the hose support bracket
IMPORTANT: Keep hoses away from
fuel strainer, fuel fittings, and bracket
C Co om mp prre esssso orr tto o E Ev va ap po orra atto orr
6. From the APU, route the # #1 10 0 ssu uccttiio on n h ho osse e up through the 3” access hole in the tractor floor to the evaporator:
a. Cut the hose to the appropriate length, attach a # #1 10 0 ffiittttiin ng g and connect to the #10 suction fitting on the
evaporator
A AP PU U tto o C Co on nd de en nsse err
7. From the APU, route the # #8 8 d diisscch ha arrg ge e h ho osse e to the condenser coil:
a. Cut the hose to the appropriate length, attach a # #8 8 ffiittttiin ng g and connect to the #8 discharge fitting located near the
top of the condenser coil.
E Ev va ap po orra atto orr tto o R Re ecce eiiv ve err D Drriie err
8. Fabricate a # #6 6 h ho osse e and fitting and attach onto the # #6 6 lliiq qu uiid d lliin ne e ffiittttiin ng g on the evaporator:
a. Route the hose down through the 3” access hole in the tractor floor to the receiver drier.
b. Cut the hose to the appropriate length, attach a # #6 6 ffiittttiin ng g and connect to the O OU UT TL LE ET T end indicated by arrow on
the receiver drier.
C Co on nd de en nsse err tto o R Re ecce eiiv ve err D Drriie err
9. Fabricate a # #6 6 h ho osse e and fitting and attach onto the # #6 6 ffiittttiin ng g on the condenser coil:
a. Route the hose to the receiver drier.
b. Cut the hose to the appropriate length, attach a # #6 6 ffiittttiin ng g and connect to the IIN NL LE ET T end on the receiver drier.
10. Tighten all fittings as specified in the chart.
11. Reinstall and secure APU side panel.
N No otte e:: The bottom pan will be reinstalled in a later step.
A A//C C H Ho osse e IIn nsstta alllla attiio on n